• <td id="ae0io"></td>
  • <button id="ae0io"><samp id="ae0io"></samp></button>
  • <kbd id="ae0io"><tt id="ae0io"></tt></kbd>
  • Product Center 產品中心


    當前位置: 首頁 > 產品中心
     PE03 鋁粉環氧涂料
    來源: 點擊數:654次 更新時間:2019-6-4 9:03:27
    產品名稱:OMELON PE03


    技 術 參 數

    Binder Type/Pigment Type           Epoxy/amines with anticorrosive aluminum pigments

    基料類型/顏料類型                環氧/胺樹脂/防銹鋁粉

    Colors                             Grey Aluminum

    顏色                               鋁灰                                       

    Finish                             Semi-gloss

    表面                               半光

    Mixing ratio                       2.8(base) to 1(curing agent) by weight 

                                       2.6(base) to 1 (curing agent) by volume

    混合比率                           重量比2.8(基料):1(固化劑)


    Curing agent                       CA23

    固化劑                             CA23

    Specific gravity                   1.18±0.03Kg/Lt

    比重                               1.18±0.03公斤/

    Solid by Volume                    85%(theoretical)

    體積固體份                         85%(理論值)

    Pot Life                       4 hours at 23℃(73.4 )

    混合使用期                          4小時,23(73.4)

    Flash point(Abel)                   Base: >25℃( >77); Curing Agent: >43>109

     閃點                               基料:>25;固化劑:>43

    Theoretical covering capability     8.5 Sq.m/Lt.(347 Sq.ft/US Gal) at 100 microns (4 mils) DFT   

    理論覆蓋能力                        8.5平方米/升,100μm干膜厚度

    Typical film thickness per coat   Wet: 118 microns (4.7 mils); - Dry: 100 microns (4 mils)

    單層膜厚                            濕膜:118μm ;干膜:100μm  

    Thinner                             Material: EURO-thinner TH03 Cleaning: Euro-thinner TH03   

    稀釋劑                              材料:TH03  清洗劑:TH03                           

    VOC                                 183 grams/Lt

    揮發性有機化合物                    183/

    Drying time                        Surface dry: approx. 4 hour (at 23℃(73.4 )

                                       and 50% relative humidity)

    干燥時間                           表干:4小時,23℃73.4℉50%的相對濕度

    Overcoating time                 Min:16 hours at 23℃(73.4 ) ?Max: 10 days

    重涂時間                            最短:16小時/23- 最長:10

    Recommended primers                 Self

    推薦底漆                            本產品

    環境溫度                            低:10℃,最高:50℃,相對濕度不能超過85%

    Substrate temperature              Should be 4℃(7) above the Dew Point

    底材溫度                            高于露點以上4℃(7℉)

    Storage and Shelf life                         The product should be kept in a cool well ventilated places

                                                                    protected  from high temperatures. Containers MUST BE

                                                                    kept tightly closed.    Shelf life: 1 year.

    儲存及有效期                       產品保存于陰涼、通風良好的地方,避 免溫度過高。

       容器必須牢固密封。 有效期:1年。

    【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
    上一篇:PS08 快干型醇酸通用底漆 下一篇:PE04 磷酸鋅環氧涂料