• <td id="ae0io"></td>
  • <button id="ae0io"><samp id="ae0io"></samp></button>
  • <kbd id="ae0io"><tt id="ae0io"></tt></kbd>
  • Product Center 產品中心

    產品中心

    當前位置: 首頁 > 產品中心
     TE06 改性煤焦油環氧底漆
    來源: 點擊數:701次 更新時間:2019-6-4 9:01:34
    產品名稱:OMELON TE06
    產品介紹:

    Specification Data     

    技術參數

    Binder Type/Pigment Type             Epoxy,thermoplastic polymers/Chemical

    and abrasion resistantpigments

    基料類型/顏料類型 環氧,熱塑性聚合物/耐化學和耐磨性顏料

    Colors                               TE0699(black),TE0660(brown)

    顏色 TE0699(黑色),TE0660(棕)

    Finish                               Matte

    表面 啞光

    Mixing ratio                         0.8(base)to 1(curing agent) by weight;

    混合比率                             1(base)to 1 (curing agent) by volume

    重量比0.8(基料):1(固化劑);

    體積比 1 (基料):1(固化劑)

    curing agent CA15

    固化劑 CA15

    Specific gravity(Mixture)             1.20± 0.03Kg/Lt

    比重 1.20±0.03公斤/

    Solids by Volume                      55% (Theoretical)

    體積固體份 55%(理論上)

    pot life                              5 hours at 23℃73,4)

    混合使用期                            5小時,23℃條件下

    Flash Point(Abel)   Base:>42(>108);Curing Agent: >30(>86)

    閃點                                     基料:>42℃ ;固化劑:>30

    Theoretical covering capacity   5.5 Sq.m/Lt. (224 sq.ft/US gal.) at 75 microns (4 mils)DFT

    理論覆蓋率 5.5平方米/升,100μm干膜厚度

    Typical film thickness per coat Wet:182 Microns (7.2mils); - Dry: 100 microns(4 mils)

    單層膜厚                                 濕膜:182μm;干 膜:100μm

    Thinner             Material: EURO-thinner TH103;Cleaning: EURO-thinner TH03

    稀釋劑                                   材料:TH03,清洗:TH03

    VOC                                       >340 grams/Lt

    揮發性有機化合物 >340/

    Drying time                           Surface dry: approx 1 hour (at 23(73.4)

    and 50% relative humidity)

    干燥時間                             表干:1小時, 23(73.4)50%

    Overcoating time                       Min:12 hours at 23(73.4)-Max:7days

    重涂時間 最短:12小時,23℃條件下,最大:7

    Recommended primers                    When applying on top of aged coatings,

    make sure they are in sound conditions.

    推薦底漆                              涂刷在舊涂層上時,確保其狀態良好。

    Ambient temperature                 Min.: 5(41)-Max: 40(104).Avoid applications

    with relative humidity higher than 85%.

    環境溫度 最低:5℃,最高:40℃相對濕度不得大于85%

    Substrate temperature               Min: 4(7) above the Dew Point; Max: 40(104).

    底材溫度                            最低:露點以上4℃      最高:40

    Storage and shelf life                      The product should be kept in a cool well ventilated places

    儲存及有效期                   protected  from high temperatures. Containers MUST BE

    kept tightly closed.  Shelf life: 1 year.

    產品應在陰涼并有良好的通風處保存,防止高溫。容器必須牢固密封。有效期:1年。
    【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
    上一篇:TH01 醇酸稀釋劑 下一篇:PS01 醇酸木器底漆