• <td id="ae0io"></td>
  • <button id="ae0io"><samp id="ae0io"></samp></button>
  • <kbd id="ae0io"><tt id="ae0io"></tt></kbd>
  • Product Center 產品中心

    產品中心

    當前位置: 首頁 > 產品中心
     HE25 乙烯基酯玻璃鱗片涂料
    來源: 點擊數:784次 更新時間:2019-6-4 8:57:02
    產品名稱:OMELON HE25
    產品介紹:
    GENERAL
    HE25 is an excellent vinyl glass flake heavy anticorrosive coating with high solid by volume. It has feature of acid resistance, alkali resistance and salt resistance. Besides it can applied in the moisture environment with temperature of 100℃.It can be regarded as primer, intermidiate and finish.
    總述
    HE25是一種極為優異的、高固含量的乙烯基酯玻璃鱗片重防腐涂料,耐酸、耐堿、耐鹽性優異,濕熱狀態下可耐100℃高溫。HE25 能作為底漆、中涂層或面漆。
    Feature
    Anti-flammable, anti-acid, anti-alkali and compatible with the glass fiber. Good mechanical performance and anti-abrasion.
    產品特性
    具有優良的阻燃、耐酸、耐堿性能與玻璃纖維相容性佳、機械性能優良,耐磨性突出。
    Recommended Uses
    Widely used on the storage tank, pipe, channel etc. Besides used on the equipment of the waster disposal plant, concrete pool, chimney as the anticorrosive coating.
    推薦用途
    廣泛使用于化工廠的儲罐、管道、溝槽、桿、架等,污水處理的設備、混凝土池和槽, 脫硫裝置設備、排煙煙囪,作為耐強腐蝕介質的涂層。
    SPECIFICATION DATA
    技 術 參 數
    Binder Type/Pigment Type
    Vinyl resin /chemical-resistant coating
    基料類型
    乙烯基樹脂/耐化學涂料
    Colors
    primer (red oxide) finish (grey)
    顏色
    底漆為鐵紅色,面漆為灰色
    Finish
    matte
    表面
    啞光
    Curing agent
    CE25
    固化劑
    CE25
    Accelerator
    CP25
    促進劑
    CP25
    Mixing ratio
    100(base):2-3(curing agent):1-1.5(Accelerator)
    混合比率
    100(基料):2-3(固化劑):1-1.5(促進劑)
    Specific gravity
    1.30±0.05公斤/升
    比重
    1.30±0.05公斤/升
    Solid by Volume
    65%(theoretical)
    體積固體份
    65%(理論值)
    Flash point(Abel)
    >23℃(ASTM D56)
    閃點
    >23℃(ASTM D56)
    Theoretical covering capability
    6.5Sq.m/Lt. at 100 microns DFT
    理論覆蓋能力
    6.5平米/升, 100μm干膜厚度
    Typical film thickness per coat
    100-200 μm
    單層膜厚
    100-200 μm
    Thinner
    Material: EURO-thinner TH13 Cleaning: EURO-thinner TH13
    稀釋劑
    材料:TH13 清洗劑:TH13
    VOC
    340grams/Lt
    揮發性有機化合物
    340克/升
    Pot life
    30minute(25℃ )
    混合使用期
    30分鐘(25℃ )
    Drying time
    Surface dry: approx. 6 hour (at 25℃)
    干燥時間
    表干: 6小時,(25℃)
    Overcoating time
    recommended Min: 12 hours, and it should be prolonged in winter.
    重涂時間
    推薦重涂時間應大于12小時,冬季應根據溫度情況適當延長重涂時間。
    Recommended primers
    Self-primer
    推薦底漆
    產品本身
    Ambient temperature
    Min:10°C Max:50°C Relative humidity should not be higher than 85%
    環境溫度
    最低:10°C,最高:50°C,.相對濕度不大于85%
    Substrate temperature
    Should be 4°C above the Dew Point
    底材溫度
    高于露點以上4°C
    Storage and Shelf life
    The product should be kept in a cool well ventilated places protected from high temperatures. Container MUST BE kept tightly closed. Shelf life: 1 year
    儲存及有效期
    產品保存于陰涼、通風良好的地方,避免過高的溫度。容器必須牢固密封。有效期:1年。
    APPLICATION GUIDE
    施 工 指 導
    Surface preparation
    All the steel surface should be pre-treated by blasted according to the Standard ISO8504:2000 and it must be free of oil, grease and pollution.
    表面處理
    所有被涂覆的鋼鐵表面均應除銹,保證被涂表面清潔、干燥、無污染,涂漆之前,所有表面均應根據ISO8504:2000標準進行評估和處理。 如果有油脂,應使用溶劑清洗干凈。
    Mixing
    Adding Accelerator (CP25) into coating, stirring fluently, then add with curing agent (CE25). The application should be after the disappearing of bubble.
    混合
    先將促進劑(CP25)加入漆料中攪拌均勻,再加入固化劑(CE25)后攪拌,等氣泡基本消失后即可施工。
    Application
    HE25 can be applied by conventional spray, airless, brush or roller.
    施工
    HE25,可采用常規噴涂,無氣噴涂,刷涂或輥涂
    Ventilation
    It is very important for the safety of the applicator and the proper performance of EURO-heat AT01, that good ventilation should be provided to all portions of the enclosed area. Dry fresh air is a must since applications with relative humidity over85% must be avoided.
    通風
    作業區的各個部分保持良好通風,對操作人員的安全和施工效果都至關重要?諝獗仨毿迈r干燥,避免在相對濕度高于85%時施工。
    SAFETY
    WARNIGN: Cause eye and skin irritation. Reaction vapour may cause respiratory irritation in sensitive individuals. May cause allergic skin reaction. Avoid breathing vapours. Do not get in eyes on skin or clothing, ear eye and skin protective equipment. Use appropriate respirator, it is recommended to avoid potential respiratory, preferably mouth-to-mouth, and call physician. BURNS: Exothermic reaction causes product to heat which is normal. Be careful handling after mixing product. Use gloves. FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin contact area with soap.
    安全措施
    警告:會引起眼睛和皮膚的刺激.反應的蒸汽可能會引起過敏人群的呼吸道刺激.可能會引起皮膚過敏反應.避免呼吸蒸汽.請勿觸及眼睛、皮膚。要使用眼、耳、皮膚的防護用具,使用合適的面具,以避免潛在的呼吸道刺激。使用后用清水徹底的清洗皮膚。如有不適請咨詢醫生。衣物再次使用前要洗滌。如果沒有呼吸要進行人工呼吸,最好嘴對嘴,并請醫生處理。灼傷:放熱反應會使產品變熱,超出正常水平。在混合后要小心處理。使用手套。急救:如果不慎接觸了眼睛,立即用清水沖洗至少15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚。
    DISCLAMER
    This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, Euronavy can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated is the sole responsibility of user. The product is intended for professional use only. In case of any doubt, contact your local  agent.
    提請注意
    此文件不是正式的技術文件,所列出的信息是可靠的。提供的的每個數值都是作為理論數據從產品的配方中計算出來的。如果需要,Euronavy可以告知任何上述給出數據的內部常用測量確定方法。由于使用條件非生產商所能控制,這里的信息不做為擔保。產品只是用于專業使用。如有任何問題,請與當地代理商聯系。向生產廠咨詢詳細的施工建議。
    GENERAL
    HE25 is an excellent vinyl glass flake heavy anticorrosive coating with high solid by volume. It has feature of acid resistance, alkali resistance and salt resistance. Besides it can applied in the moisture environment with temperature of 100℃.It can be regarded as primer, intermidiate and finish.
    總述
    HE25是一種極為優異的、高固含量的乙烯基酯玻璃鱗片重防腐涂料,耐酸、耐堿、耐鹽性優異,濕熱狀態下可耐100℃高溫。HE25 能作為底漆、中涂層或面漆。
    Feature
    Anti-flammable, anti-acid, anti-alkali and compatible with the glass fiber. Good mechanical performance and anti-abrasion.
    產品特性
    具有優良的阻燃、耐酸、耐堿性能與玻璃纖維相容性佳、機械性能優良,耐磨性突出。
    Recommended Uses
    Widely used on the storage tank, pipe, channel etc. Besides used on the equipment of the waster disposal plant, concrete pool, chimney as the anticorrosive coating.
    推薦用途
    廣泛使用于化工廠的儲罐、管道、溝槽、桿、架等,污水處理的設備、混凝土池和槽, 脫硫裝置設備、排煙煙囪,作為耐強腐蝕介質的涂層。
    SPECIFICATION DATA
    技 術 參 數
    Binder Type/Pigment Type
    Vinyl resin /chemical-resistant coating
    基料類型
    乙烯基樹脂/耐化學涂料
    Colors
    primer (red oxide) finish (grey)
    顏色
    底漆為鐵紅色,面漆為灰色
    Finish
    matte
    表面
    啞光
    Curing agent
    CE25
    固化劑
    CE25
    Accelerator
    CP25
    促進劑
    CP25
    Mixing ratio
    100(base):2-3(curing agent):1-1.5(Accelerator)
    混合比率
    100(基料):2-3(固化劑):1-1.5(促進劑)
    Specific gravity
    1.30±0.05公斤/升
    比重
    1.30±0.05公斤/升
    Solid by Volume
    65%(theoretical)
    體積固體份
    65%(理論值)
    Flash point(Abel)
    >23℃(ASTM D56)
    閃點
    >23℃(ASTM D56)
    Theoretical covering capability
    6.5Sq.m/Lt. at 100 microns DFT
    理論覆蓋能力
    6.5平米/升, 100μm干膜厚度
    Typical film thickness per coat
    100-200 μm
    單層膜厚
    100-200 μm
    Thinner
    Material: EURO-thinner TH13 Cleaning: EURO-thinner TH13
    稀釋劑
    材料:TH13 清洗劑:TH13
    VOC
    340grams/Lt
    揮發性有機化合物
    340克/升
    Pot life
    30minute(25℃ )
    混合使用期
    30分鐘(25℃ )
    Drying time
    Surface dry: approx. 6 hour (at 25℃)
    干燥時間
    表干: 6小時,(25℃)
    Overcoating time
    recommended Min: 12 hours, and it should be prolonged in winter.
    重涂時間
    推薦重涂時間應大于12小時,冬季應根據溫度情況適當延長重涂時間。
    Recommended primers
    Self-primer
    推薦底漆
    產品本身
    Ambient temperature
    Min:10°C Max:50°C Relative humidity should not be higher than 85%
    環境溫度
    最低:10°C,最高:50°C,.相對濕度不大于85%
    Substrate temperature
    Should be 4°C above the Dew Point
    底材溫度
    高于露點以上4°C
    Storage and Shelf life
    The product should be kept in a cool well ventilated places protected from high temperatures. Container MUST BE kept tightly closed. Shelf life: 1 year
    儲存及有效期
    產品保存于陰涼、通風良好的地方,避免過高的溫度。容器必須牢固密封。有效期:1年。
    APPLICATION GUIDE
    施 工 指 導
    Surface preparation
    All the steel surface should be pre-treated by blasted according to the Standard ISO8504:2000 and it must be free of oil, grease and pollution.
    表面處理
    所有被涂覆的鋼鐵表面均應除銹,保證被涂表面清潔、干燥、無污染,涂漆之前,所有表面均應根據ISO8504:2000標準進行評估和處理。 如果有油脂,應使用溶劑清洗干凈。
    Mixing
    Adding Accelerator (CP25) into coating, stirring fluently, then add with curing agent (CE25). The application should be after the disappearing of bubble.
    混合
    先將促進劑(CP25)加入漆料中攪拌均勻,再加入固化劑(CE25)后攪拌,等氣泡基本消失后即可施工。
    Application
    HE25 can be applied by conventional spray, airless, brush or roller.
    施工
    HE25,可采用常規噴涂,無氣噴涂,刷涂或輥涂
    Ventilation
    It is very important for the safety of the applicator and the proper performance of EURO-heat AT01, that good ventilation should be provided to all portions of the enclosed area. Dry fresh air is a must since applications with relative humidity over85% must be avoided.
    通風
    作業區的各個部分保持良好通風,對操作人員的安全和施工效果都至關重要?諝獗仨毿迈r干燥,避免在相對濕度高于85%時施工。
    SAFETY
    WARNIGN: Cause eye and skin irritation. Reaction vapour may cause respiratory irritation in sensitive individuals. May cause allergic skin reaction. Avoid breathing vapours. Do not get in eyes on skin or clothing, ear eye and skin protective equipment. Use appropriate respirator, it is recommended to avoid potential respiratory, preferably mouth-to-mouth, and call physician. BURNS: Exothermic reaction causes product to heat which is normal. Be careful handling after mixing product. Use gloves. FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin contact area with soap.
    安全措施
    警告:會引起眼睛和皮膚的刺激.反應的蒸汽可能會引起過敏人群的呼吸道刺激.可能會引起皮膚過敏反應.避免呼吸蒸汽.請勿觸及眼睛、皮膚。要使用眼、耳、皮膚的防護用具,使用合適的面具,以避免潛在的呼吸道刺激。使用后用清水徹底的清洗皮膚。如有不適請咨詢醫生。衣物再次使用前要洗滌。如果沒有呼吸要進行人工呼吸,最好嘴對嘴,并請醫生處理。灼傷:放熱反應會使產品變熱,超出正常水平。在混合后要小心處理。使用手套。急救:如果不慎接觸了眼睛,立即用清水沖洗至少15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚。
    DISCLAMER
    This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, Euronavy can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated is the sole responsibility of user. The product is intended for professional use only. In case of any doubt, contact your local agent.
    提請注意
    此文件不是正式的技術文件,所列出的信息是可靠的。提供的的每個數值都是作為理論數據從產品的配方中計算出來的。如果需要,Euronavy可以告知任何上述給出數據的內部常用測量確定方法。由于使用條件非生產商所能控制,這里的信息不做為擔保。產品只是用于專業使用。如有任何問題,請與當地代理商聯系。向生產廠咨詢詳細的施工建議。
    【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
    上一篇:BE06 無溶劑型自流平環氧地坪漆 下一篇:WP07 浸蝕劑